Section 232 metals scope reference

719 HTS lines from CBP's Metals HTS List, built from a versioned rules table (JSON, CSV, version 2026-06-08.1). Annex I-A: 279 · Annex I-B: 326 · Annex III: 86 · Annex I-C: 28.

Look up an HTS number you already have. We never suggest a classification. MetalAttest provides data for the importer's and customs broker's review. We do not classify goods and we do not give customs or legal advice. Your licensed customs broker decides classification and files the entry.

Last verified: at smoke-test launch (day 0), against the CBP Metals HTS List attached to CSMS #68855869. Re-checked weekly during the smoke test; see the changelog.

Chapter 37

• 3701.30.00 I-B Other plates and film, with any side exceeding 255 mm

Chapter 72 (15% de minimis not available)

• 7206 I-A Iron and nonalloy steel in ingots or other primary forms (excluding iron of heading 7203):
• 7207 I-A Semifinished products of iron or nonalloy steel:
• 7208 I-A Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled,
• 7209 I-A Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, cold-rolled
• 7210 I-A Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, clad, plated
• 7211 I-A Flat-rolled products of iron or nonalloy steel, of a width of less than 600 mm, not clad,
• 7212 I-A Flat-rolled products of iron or nonalloy steel, of a width of less than 600 mm, clad, plat
• 7213 I-A Bars and rods, hot-rolled, in irregularly wound coils, of iron or nonalloy steel:
• 7214 I-A Other bars and rods of iron or nonalloy steel, not further worked than forged, hot-rolled,
• 7215 I-A Other bars and rods of iron or nonalloy steel:
• 7216.10.00 I-A U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height
• 7216.21.00 I-A L sections
• 7216.22.00 I-A T sections
• 7216.31.00 I-A U sections
• 7216.32.00 I-A I sections (standard beams)
• 7216.33.00 I-A H sections
• 7216.40.00 I-A L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of
• 7216.50.00 I-A Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extrud
• 7216.91.0010 I-A Drilled, notched, punched or cambered
• 7216.99.00 I-A Other
• 7217 I-A Wire of iron or nonalloy steel:
• 7218 I-A Stainless steel in ingots or other primary forms; semi-finished products of stainless stee
• 7219 I-A Flat-rolled products of stainless steel, of a width of 600 mm or more:
• 7220 I-A Flat-rolled products of stainless steel, of a width of less than 600 mm:
• 7221 I-A
• 7222 I-A Other bars and rods of stainless steel; angles, shapes and sections of stainless steel:
• 7223 I-A Wire of stainless steel:
• 7224 I-A Other alloy steel in ingots or other primary forms; semi-finished products of other alloy
• 7225 I-A Flat-rolled products of other alloy steel, of a width of 600 mm or more:
• 7226 I-A Flat-rolled products of other alloy steel, of a width of less than 600 mm:
• 7227 I-A Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel:
• 7228 I-A Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy stee
• 7229 I-A Wire of other alloy steel:

Chapter 73 (15% de minimis not available)

• 7301.10.00 I-A Sheet piling
• 7301.20.10 I-A Of iron or nonalloy steel
• 7301.20.50 I-A Of alloy steel
• 7302.10 I-A Rails:
• 7302.30.00 I-A Switch blades, crossing frogs, point rods and other crossing pieces
• 7302.40.00 I-A Fish-plates and sole plates
• 7302.90 I-A Other:
• 7304 I-A Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel:
• 7305 I-A Other tubes and pipes (for example, welded, riveted or similarly closed), having circular
• 7306 I-A Other tubes, pipes and hollow profiles (for example, open seamed or welded, riveted or sim
• 7307.19.30 I-A Ductile fittings
• 7307.19.90 I-A Other
• 7307.21.10 I-A Not machined, not tooled and not otherwise processed after forging
• 7307.21.50 I-A Other
• 7307.22.10 I-A Sleeves (couplings)
• 7307.22.50 I-A Other
• 7307.23.00 I-A Butt welding fittings
• 7307.29.00 I-A Other
• 7307.91.10 I-A Of iron or nonalloy steel
• 7307.91.30 I-A Of alloy steel (except stainless steel)
• 7307.91.50 I-A Other
• 7307.92.30 I-A Sleeves (couplings)
• 7307.92.90 I-A Other
• 7307.93.30 I-A Of iron or nonalloy steel
• 7307.93.60 I-A Of alloy steel (except stainless steel)
• 7307.93.90 I-A With an inside diameter of 360 mm or more
• 7307.99.10 I-A Of iron or nonalloy steel
• 7307.99.30 I-A Of alloy steel (except stainless steel)
• 7307.99.50 I-A Other
• 7308.10.00 I-A Bridges and bridge sections
• 7308.20.00 I-A Towers and lattice masts
• 7308.20.0035 I-A Tubular wind turbine towers, whether or not tapered, and sectional components thereof
• 7308.30.10 I-A Of stainless steel
• 7308.30.50 I-A Other
• 7308.40.00 I-A Equipment for scaffolding, shuttering, propping or pit- propping
• 7308.90.30 I-A Not in part of alloy steel
• 7308.90.60 I-A Other
• 7308.90.70 I-A Steel grating
• 7308.90.95 I-A Other
• 7309.00.00 I-A Reservoirs, tanks, vats and similar containers for any material (other than compressed or
• 7310.10.00 I-A Of a capacity of 50 liters or more
• 7310.21.00 I-A Cans which are to be closed by soldering or crimping
• 7310.29.00 I-A Other
• 7311.00.00 I-A Containers for compressed or liquefied gas, of iron or steel
• 7312.10.05 I-A Fitted with fittings or made up into articles
• 7312.10.10 I-A Other
• 7312.10.20 I-A Fitted with fittings or made up into articles
• 7312.10.30 I-A Other
• 7312.10.50 I-A Fitted with fittings or made up into articles
• 7312.10.60 I-A Other
• 7312.10.70 I-A Fitted with fittings or made up into articles
• 7312.10.80 I-A Of brass plated wire
• 7312.10.90 I-A Other
• 7312.90.00 I-A Other
• 7313.00.00 I-A Barbed wire of iron or steel; twisted hoop or single flat wire, barbed or not, and loosely
• 7314.12.10 I-A With meshes not finer than 12 wires to the lineal centimeter in warp or filling
• 7314.12.20 I-A With meshes finer than 12 but not finer than 36 wires to the lineal centimeter in warp or
• 7314.12.30 I-A With 94 or more wires to the lineal centimeter
• 7314.12.60 I-A Other
• 7314.12.90 I-A Other
• 7314.14.10 I-A With meshes not finer than 12 wires to the lineal centimeter in warp or filling
• 7314.14.20 I-A With meshes finer than 12 but not finer than 36 wires to the lineal centimeter in warp or
• 7314.14.30 I-A With 94 or more wires to the lineal centimeter
• 7314.14.60 I-A Other
• 7314.14.90 I-A Other
• 7314.19.01 I-A Other
• 7314.20.00 I-A Grill, netting and fencing, welded at the intersection, of wire with a maximum cross-secti
• 7314.31.10 I-A Wire fencing plated or coated with zinc, whether or not covered with plastic material
• 7314.31.50 I-A Other:
• 7314.39.00 I-A Other
• 7314.41.00 I-A Plated or coated with zinc
• 7314.42.00 I-A Coated with plastics
• 7314.49.30 I-A Not cut to shape
• 7314.49.60 I-A Cut to shape
• 7314.50.00 I-A Expanded metal
• 7315.11.00 I-A Roller chain
• 7315.12.00 I-A Other chain
• 7315.19.00 I-A Parts
• 7315.20.10 I-A Not over 8 mm in diameter
• 7315.20.50 I-A Over 8 mm in diameter
• 7315.81.00 I-A Stud link
• 7315.82.10 I-A Not over 10 mm in diameter
• 7315.82.30 I-A Over 10 mm in diameter
• 7315.82.50 I-A Not over 10 mm in diameter
• 7315.82.70 I-A Over 10 mm in diameter
• 7315.89.10 I-A Not over 8 mm in diameter
• 7315.89.30 I-A Over 8 mm in diameter
• 7315.89.50 I-A Other
• 7315.90.00 I-A Other parts
• 7316.00.00 I-A Anchors, grapnels and parts thereof, of iron or steel
• 7317.00.10 I-A Thumb tacks
• 7317.00.20 I-A Not threaded
• 7317.00.30 I-A Threaded
• 7317.00.55 I-A Made of round wire
• 7317.00.65 I-A Other
• 7317.00.75 I-A Of two or more pieces
• 7318.11.00 I-A Coach screws
• 7318.12.00 I-A Other wood screws
• 7318.13.00 I-A Screw hooks and screw rings
• 7318.14.10 I-A Having shanks or threads with a diameter of less than 6 mm
• 7318.14.50 I-A Having shanks or threads with a diameter of 6 mm or more
• 7318.15.20 I-A Bolts and bolts and their nuts or washers entered or exported in the same shipment
• 7318.15.40 I-A Machine screws 9.5 mm or more in length and 3.2 mm or more in diameter (not including cap
• 7318.15.50 I-A Studs
• 7318.15.60 I-A Having shanks or threads with a diameter of less than 6 mm
• 7318.15.80 I-A Having shanks or threads with a diameter of 6 mm or more
• 7318.16.00 I-A Nuts
• 7318.19.00 I-A Other
• 7318.21.00 I-A Spring washers and other lock washers
• 7318.22.00 I-A Other washers
• 7318.23.00 I-A Rivets
• 7318.24.00 I-A Cotters and cotter pins
• 7318.29.00 I-A Other
• 7319.40.20 I-A Safety pins
• 7319.40.30 I-A Dressmakers' or common pins
• 7319.40.50 I-A Other
• 7319.90.10 I-A Sewing, darning or embroidery needles
• 7319.90.90 I-A Other
• 7320.10.30 I-A To be used in motor vehicles having a G.V.W. not exceeding 4 metric tons
• 7320.10.60 I-A Other
• 7320.10.90 I-A Other
• 7320.20.10 I-A Suitable for motor-vehicle suspension
• 7320.20.50 I-A Other
• 7320.90.10 I-A Hairsprings
• 7320.90.50 I-A Other
• 7321.11.10 I-B Portable
• 7321.11.30 I-B Stoves or ranges:
• 7321.11.60 I-B Other
• 7321.12.00 I-B For liquid fuel
• 7321.19.00 I-B Other, including appliances for solid fuel
• 7321.81.10 I-B Portable
• 7321.81.50 I-B Other
• 7321.82.10 I-B Portable
• 7321.82.50 I-B Other
• 7321.89.00 I-B Other, including appliances for solid fuel
• 7321.90.10 I-B Cooking chambers, whether or not assembled
• 7321.90.20 I-B Top surface panels with or without burners or controls
• 7321.90.40 I-B Door assemblies, incorporating more than one of the following: inner panel, outer panel, w
• 7321.90.50 I-B Other
• 7321.90.60 I-B Other
• 7322.19.00 I-B Other
• 7322.90.00 I-B Other, including parts
• 7323.10.00 I-B Iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like
• 7323.93.00 I-B Of stainless steel
• 7323.94.00 I-B Of iron (other than cast iron) or steel, enameled
• 7323.99.10 I-B Coated or plated with silver
• 7323.99.30 I-B Other
• 7323.99.50 I-B Of tinplate
• 7323.99.70 I-B Cookingware
• 7323.99.90 I-B Other
• 7324.10.00 I-B Sinks and wash basins, of stainless steel
• 7324.29.00 I-B Other
• 7324.90.00 I-B Other, including parts
• 7325.10.0010 I-A Manhole covers, rings and frames
• 7325.10.0020 I-A Catch basins, grates and frames
• 7325.10.0025 I-A Cleanout covers and frames
• 7325.10.0030 I-A Valve and service boxes
• 7325.10.0035 I-B Meter boxes
• 7325.10.0080 I-A Other
• 7325.91.00 I-A Grinding balls and similar articles for mills
• 7325.99.10 I-A Of cast iron
• 7325.99.50 I-A Other
• 7326.11.00 I-A Grinding balls and similar articles for mills
• 7326.19.00 I-A Other
• 7326.20.0010 I-B Belts and belting
• 7326.20.0020 I-B Garment hangers
• 7326.20.0030 I-B Sod staples, U staples, irrigation staples, ground staples, and ground pins
• 7326.20.0040 I-B Double loop bar ties and double loop wire ties
• 7326.20.0055 I-B Paint roller frames
• 7326.20.0090 I-A Other
• 7326.90.10 I-A Of tinplate
• 7326.90.25 I-A Cable or inner wire for caliper and cantilever brakes and casing therefor, whether or not
• 7326.90.35 I-B Containers of a kind normally carried on the person, in the pocket or in the handbag
• 7326.90.45 I-B Horse and mule shoes
• 7326.90.60 I-A Coated or plated with precious metal
• 7326.90.8605 I-A Rods for electrical grounding
• 7326.90.8610 I-A Laminated goods consisting of two or more flat-rolled sheets of iron or steel held togethe
• 7326.90.8630 I-A Hangers and similar supports for tubes and pipes
• 7326.90.8635 I-A Fence posts, studded with corrugations, knobs, studs, notches or similar protrusions, with
• 7326.90.8645 I-A Barbed tape
• 7326.90.8660 I-B Ladders
• 7326.90.8675 I-B Paint roller frames (other than of iron or steel wire)
• 7326.90.8676 I-B Metal handles for brooms, mops, paint applicators and similar products
• 7326.90.8677 I-B Burial caskets
• 7326.90.8688 I-A Other

Chapter 74 (15% de minimis not available)

• 7406.10.00 I-A Powders of non-lamellar structure
• 7406.20.00 I-A Powders of lamellar structure; flakes
• 7407.10.15 I-A Hollow profiles
• 7407.10.30 I-A Other
• 7407.10.50 I-A Bars and rods
• 7407.21.15 I-A Hollow profiles
• 7407.21.30 I-A Other
• 7407.21.50 I-A Low fuming brazing rods
• 7407.21.70 I-A Having a rectangular cross section
• 7407.21.90 I-A Other
• 7407.29.16 I-A Hollow
• 7407.29.34 I-A Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silv
• 7407.29.38 I-A Other
• 7407.29.40 I-A Bars and rods of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloy
• 7407.29.50 I-A Other bars and rods
• 7408.11.30 I-A With a maximum cross-sectional dimension over 9.5 mm
• 7408.11.60 I-A With a maximum cross-sectional dimension over 6 mm but not over 9.5 mm
• 7408.19.00 I-A Other
• 7408.21.00 I-A Of copper-zinc base alloys (brass)
• 7408.22.10 I-A Coated or plated with metal
• 7408.22.50 I-A Not coated or plated with metal
• 7408.29.10 I-A Coated or plated with metal
• 7408.29.50 I-A Not coated or plated with metal
• 7409.11.10 I-A Of a thickness of 5 mm or more
• 7409.11.50 I-A Of a thickness of less than 5 mm
• 7409.19.10 I-A Of a thickness of 5 mm or more
• 7409.19.50 I-A Of a width of 500 mm or more
• 7409.19.90 I-A Of a width of less than 500 mm
• 7409.21.00 I-A In coils
• 7409.29.00 I-A Other
• 7409.31.10 I-A Of a thickness of 5 mm or more
• 7409.31.50 I-A Of a width of 500 mm or more
• 7409.31.90 I-A Of a width of less than 500 mm
• 7409.39.10 I-A Of a thickness of 5 mm or more
• 7409.39.50 I-A Of a width of 500 mm or more
• 7409.39.90 I-A Of a width of less than 500 mm
• 7409.40.00 I-A Of copper-nickel base alloys (cupro-nickel) or copper- nickel-zinc base alloys (nickel sil
• 7409.90.10 I-A Of a thickness of 5 mm or more
• 7409.90.50 I-A Of a width of 500 mm or more
• 7409.90.90 I-A Of a width of less than 500 mm
• 7410.11.00 I-A Of refined copper
• 7410.12.00 I-A Of copper alloys
• 7410.21.30 I-A Copper clad laminates
• 7410.21.60 I-A Other
• 7410.22.00 I-A Of copper alloys
• 7411.10.10 I-A Seamless
• 7411.10.50 I-A Other
• 7411.21.10 I-A Seamless
• 7411.21.50 I-A Other
• 7411.22.00 I-A Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel-silv
• 7411.29.10 I-A Seamless
• 7411.29.50 I-A Other
• 7412.10.00 I-A Of refined copper
• 7412.20.00 I-A Of copper alloys
• 7413.00.10 I-A Stranded wire
• 7413.00.50 I-A Other
• 7413.00.90 I-A Fitted with fittings or made up into articles
• 7415.10.00 I-A Nails and tacks, drawing pins, staples and similar articles
• 7415.21.00 I-A Washers (including spring washers)
• 7415.29.00 I-A Other
• 7415.33.05 I-A Screws for wood
• 7415.33.10 I-A Muntz or yellow metal bolts
• 7415.33.80 I-A Other screws and bolts; nuts
• 7415.39.00 I-A Other
• 7418.10.00 I-A Table, kitchen or other household articles and parts thereof; pot scourers and scouring or
• 7418.20.10 I-A Of copper-zinc base alloys (brass)
• 7418.20.50 I-A Other
• 7419.20.00 I-A Cast, molded, stamped or forged, but not further worked
• 7419.80.03 I-A Fourdrinier wires, seamed or not seamed, suitable for use in papermaking machines, with 94
• 7419.80.06 I-A Other
• 7419.80.09 I-A Other
• 7419.80.15 I-A Containers of a kind normally carried on the person, in the pocket or in the handbag
• 7419.80.16 I-A Copper springs
• 7419.80.17 I-A Chain and parts thereof
• 7419.80.30 I-A Coated or plated with precious metal
• 7419.80.50 I-A Other

Chapter 76 (15% de minimis not available)

• 7601 I-A Unwrought aluminum:
• 7604 I-A Aluminum bars, rods and profiles:
• 7605 I-A Aluminum wire:
• 7606 I-A Aluminum plates, sheets and strip, of a thickness exceeding 0.2 mm:
• 7607 I-A Aluminum foil (whether or not printed, or backed with paper, paperboard, plastics or simil
• 7608 I-A Aluminum tubes and pipes:
• 7609 I-A
• 7610.10.00 I-A Doors, windows and their frames and thresholds for doors
• 7610.90.00 I-A Other
• 7612.10.00 I-A Collapsible tubular containers
• 7612.90.10 I-A Of a capacity not exceeding 20 liters
• 7612.90.50 I-A Other
• 7613.00.00 I-A Aluminum containers for compressed or liquefied gas
• 7614.10.10 I-A Not fitted with fittings and not made up into articles
• 7614.10.50 I-A Fitted with fittings or made up into articles
• 7614.90.20 I-A Electrical conductors
• 7614.90.40 I-A Other
• 7614.90.50 I-A Fitted with fittings or made up into articles
• 7615.10.2015 I-B Bakeware (cookware not suitable for stove top use)
• 7615.10.2025 I-B Other
• 7615.10.3015 I-B Bakeware (cookware not suitable for stove top use)
• 7615.10.3025 I-B Other
• 7615.10.5020 I-B Bakeware (cookware not suitable for stove top use)
• 7615.10.5040 I-B Other
• 7615.10.7125 I-B Containers suitable for food preparation, baking, reheating or storage, 0.04 mm or more bu
• 7615.10.7130 I-B Bakeware (cookware not suitable for stove top use)
• 7615.10.7155 I-B Other
• 7615.10.7180 I-B Other
• 7615.10.91 I-B Other
• 7615.20.00 I-B Sanitary ware and parts thereof
• 7616.10.9090 I-A Other
• 7616.99.10 I-B Luggage frames
• 7616.99.5120 I-A Laminated goods consisting of 2 or more flat-rolled sheets of aluminum held together with
• 7616.99.5130 I-B Ladders
• 7616.99.5140 I-B Venetian blinds and parts thereof
• 7616.99.5150 I-A Hangers and supports for pipes and tubes
• 7616.99.5160 I-A Castings
• 7616.99.5170 I-A Forgings
• 7616.99.5175 I-A Articles of wire
• 7616.99.5190 I-A Other

Chapter 82

• 8202.39.0040 I-B Diamond sawblade cores
• 8203.40.60 I-B Other (including parts)
• 8205.59.55 I-B Other
• 8205.70.00 I-B Vises, clamps and the like, and parts thereof
• 8207.20.0070 III Parts
• 8207.30.6062 III Metal forming dies, including thread-rolling dies
• 8207.30.6095 III Parts
• 8211.10.00 I-B Sets of assorted articles
• 8211.91.10 I-B Knives with silver-plated handles
• 8211.91.20 I-B Valued under 25¢ each, not over 25.9 cm in overall length
• 8211.91.25 I-B Other
• 8211.91.30 I-B Valued under 25¢ each, not over 25.9 cm in overall length
• 8211.91.40 I-B Other
• 8211.91.50 I-B Knives with rubber or plastic handles
• 8211.91.80 I-B Other
• 8211.92.20 I-B Kitchen and butcher knives
• 8211.92.40 I-B Other
• 8211.92.60 I-B Hunting knives with wood handles
• 8211.92.90 I-B Other
• 8211.93.00 I-B Knives having other than fixed blades
• 8211.94.10 I-B For knives having fixed blades
• 8211.94.50 I-B Other
• 8211.95.10 I-B For table knives having fixed blades
• 8211.95.50 I-B For other knives having fixed blades
• 8211.95.90 I-B Other
• 8215.10.00 I-B Sets of assorted articles containing at least one article plated with precious metal
• 8215.20.00 I-B Other sets of assorted articles
• 8215.91.30 I-B Forks
• 8215.91.60 I-B Spoons and ladles
• 8215.91.90 I-B Other (including parts)
• 8215.99.01 I-B Valued under 25¢ each, not over 25.9 cm in overall length
• 8215.99.05 I-B Other
• 8215.99.10 I-B Valued under 25¢ each
• 8215.99.15 I-B Other
• 8215.99.20 I-B With rubber or plastic handles
• 8215.99.22 I-B Without their handles
• 8215.99.24 I-B Table forks (including table serving forks) and barbecue forks with wooden handles
• 8215.99.26 I-B Other
• 8215.99.30 I-B Spoons valued under 25¢ each
• 8215.99.35 I-B Other
• 8215.99.40 I-B With base metal (except stainless steel) or nonmetal handles
• 8215.99.45 I-B Other
• 8215.99.50 I-B Other (including parts)

Chapter 83

• 8302.10.30 I-B Designed for motor vehicles
• 8302.10.60 I-B Other
• 8302.20.00 I-B Castors, and parts thereof
• 8302.30.3010 I-B Pneumatic cylinders for lifting, lowering, dampening or counter-balancing
• 8302.30.3060 I-B Other
• 8302.41.30 I-B Door closers (except automatic door closers), and parts thereof
• 8302.41.60 I-B Of iron or steel, of aluminum or of zinc
• 8302.41.6015 I-B Doorstops, chain door fasteners, door pulls, kick plates, door knockers and escutcheons
• 8302.41.6045 I-B Other
• 8302.41.6050 I-B For curtains, draperies and window shades
• 8302.41.6080 I-B Other
• 8302.42.30 I-B Of iron or steel, of aluminum or of zinc
• 8302.49.60 I-B Of iron or steel, of aluminum or of zinc
• 8302.50.00 I-B Hat-racks, hat pegs, brackets and similar fixtures, and parts thereof
• 8302.60.30 I-B Automatic door closers
• 8302.60.90 I-B Parts
• 8305.10.0050 I-B Other
• 8305.20.00 I-B Staples in strips
• 8306.30.00 I-B Photograph, picture or similar frames; mirrors; and parts thereof
• 8307.10.60 I-B Other
• 8307.90.60 I-B Other
• 8309.90.0020 I-B For cans of a kind used for the conveyance of beverages as described in statistical note 2
• 8309.90.0025 I-B Other
• 8309.90.0080 I-B Of steel

Chapter 84

• 8401.40.00 III Parts of nuclear reactors
• 8403.10.00 I-B Boilers
• 8406.90.40 I-B Blades, rotating or stationary
• 8407.90.10 III To be installed in agricultural or horticultural machinery or equipment
• 8407.90.90 I-B Other
• 8410.90.00 I-B Parts, including regulators
• 8411.81.80 I-B Other
• 8412.21.00 I-B Linear acting (cylinders)
• 8412.29.80 I-B Other
• 8412.90.9070 I-B Wind turbine blades, imported in accordance with statistical note 2 of this chapter
• 8412.90.9075 I-B Wind turbine hubs
• 8413.81.00 I-B Pumps
• 8413.91.9055 I-B
• 8413.91.9060 I-B
• 8413.91.9096 I-B
• 8414.30.40 I-B Not exceeding 1/4 horsepower
• 8414.59.6590 I-B Axial
• 8414.80.16 I-B Other
• 8414.90.30 I-B Stators and rotors of goods of subheading 8414.30
• 8414.90.41 I-B Other
• 8415.10.30 I-B Self-contained
• 8415.10.60 III Incorporating a refrigerating unit and a valve for reversal of the cooling/heat cycle (rev
• 8415.10.90 III Other
• 8415.81.01 III Incorporating a refrigerating unit and a valve for reversal of the cooling/heat cycle (rev
• 8415.82.01 III Other, incorporating a refrigerating unit
• 8415.83.00 I-B Not incorporating a refrigerating unit
• 8415.90.40 I-B Chassis, chassis bases and outer cabinets
• 8415.90.80 III Other
• 8415.90.8010 III Of copper or copper alloys
• 8415.90.8020 III Other
• 8415.90.8045 III Of automotive air conditioners
• 8415.90.8085 III Other
• 8417.90.00 III Parts
• 8418.10.00 I-B Combined refrigerator-freezers, fitted with separate external doors or drawers, or combina
• 8418.21.00 I-B Compression type
• 8418.29.20 I-B Other
• 8418.30.00 I-B Freezers of the chest type, not exceeding 800 liters capacity
• 8418.40.00 I-B Freezers of the upright type, not exceeding 900 liters capacity
• 8418.99.40 I-B Door assemblies incorporating more than one of the following: inner panel; outer panel; in
• 8418.99.8005 I-B Not exceeding 746 W
• 8418.99.8050 I-B Parts of combined refrigerator-freezers fitted with separate external doors and parts of h
• 8418.99.8060 I-B Other
• 8419.50.10 I-B Brazed aluminum plate-fin heat exchangers
• 8419.50.50 I-B Other
• 8419.81.50 III Cooking stoves, ranges and ovens
• 8419.90.10 I-B Of instantaneous or storage water heaters
• 8421.29.00 III Other
• 8422.11.00 I-B Of the household type
• 8422.90.0640 I-B Of the household type
• 8424.89.90 III Other
• 8424.90.9080 I-B Other
• 8425.42.00 I-B Other jacks and hoists, hydraulic
• 8426.20.00 I-B Tower cranes
• 8426.49.00 I-B Other
• 8426.99.00 I-B Other
• 8427.10.40 I-C Rider-type, counterbalanced fork-lift trucks
• 8427.10.80 I-C Other
• 8427.20.40 I-C Rider-type, counterbalanced fork-lift trucks
• 8427.20.80 I-C Other
• 8427.90.00 I-C Other trucks
• 8428.32.00 III Other, bucket type
• 8428.33.00 III Other, belt type
• 8428.39.00 III Other
• 8428.60.00 III Teleferics, chair lifts, ski draglines; traction mechanisms for funiculars
• 8428.70.00 III Industrial robots
• 8428.90.03 III Other machinery
• 8429.11.00 I-C Track laying
• 8429.19.00 I-C Other
• 8429.20.00 I-C Graders and levelers
• 8429.30.00 I-C Scrapers
• 8429.40.00 I-C Tamping machines and road rollers
• 8429.51.10 I-C Wheel-type
• 8429.51.50 I-C Other
• 8429.52.10 I-C Backhoes, shovels, clamshells and draglines
• 8429.52.50 I-C Other
• 8429.59.10 I-C Backhoes, shovels, clamshells and draglines
• 8429.59.50 I-C Other
• 8431.20.00 I-C Of machinery of heading 8427
• 8431.31.00 I-B Of passenger or freight elevators other than continuous action, skip hoists or escalators
• 8431.39.00 III Other
• 8431.41.00 III Buckets, shovels, grabs and grips
• 8431.42.00 I-C Bulldozer or angledozer blades
• 8431.43.40 I-B Of offshore oil and natural gas drilling and production platforms
• 8431.43.80 I-B Other
• 8431.49.10 I-B Of machinery of heading 8426
• 8431.49.90 I-C Other
• 8432.10.00 III Plows
• 8432.90.00 III Parts
• 8433.11.00 I-B Powered, with the cutting device rotating in a horizontal plane
• 8433.20.00 III Other mowers, including cutter bars for tractor mounting
• 8433.51.00 III Combine harvester-threshers
• 8433.59.00 III Other
• 8433.90.10 I-B Of mowers for lawns, parks or sports grounds
• 8433.90.50 III Other
• 8443.16.00 I-B Flexographic printing machinery
• 8450.11.00 I-B Fully automatic machines
• 8450.20.00 I-B Machines, each of a dry linen capacity exceeding 10 kg
• 8451.21.00 I-B Each of a dry linen capacity not exceeding 10 kg
• 8451.29.00 I-B Other
• 8454.20.0010 III For steel ingots
• 8454.20.0060 III Other
• 8455.30.00 III Rolls for rolling mills
• 8455.90.40 III Castings or weldments, individually weighing less than 90 tons, for the machines of headin
• 8455.90.80 III Other
• 8457.10.00 III Machining centers
• 8467.22.00 I-B Saws
• 8467.29.00 I-B Other
• 8467.81.00 I-B Chain saws
• 8467.89.50 I-B Other
• 8474.90.00 III Parts
• 8477.10.30 III For manufacturing shoes
• 8477.10.40 III For use in the manufacture of optical media
• 8477.10.90 III Other
• 8477.90.25 III Base, bed, platen, clamp cylinder, ram, and injection castings, weldments and fabrications
• 8477.90.8601 III Of injection-molding machines
• 8479.89.55 III Trash compactors
• 8479.89.65 III Other
• 8479.89.9599 III
• 8479.90.45 I-B Frame assemblies incorporating more than one of the following: baseplate; side frames; pow
• 8479.90.55 I-B Ram assemblies incorporating a ram wrapper and/or ram cover
• 8479.90.65 I-B Container assemblies incorporating more than one of the following: container bottom; conta
• 8479.90.75 I-B Cabinets or cases
• 8479.90.85 I-B Other
• 8479.90.95 III Other
• 8479.90.9596 III
• 8480.49.0010 III Molds for centrifugal casting of ductile iron pipe
• 8480.71.8045 III Injection type
• 8480.71.8060 III Compression type
• 8480.79.9010 III Blow molds
• 8481.90.9060 I-B Valve bodies
• 8481.90.9085 I-B Other
• 8482.10.5004 I-B Unground bearings
• 8482.10.5008 I-B Thrust bearings
• 8482.10.5012 I-B Linear bearings
• 8482.10.5016 I-B Flanged
• 8482.10.5024 I-B Other
• 8482.10.5028 I-B Other
• 8482.10.5032 I-B Maximum or full capacity type
• 8482.10.5036 I-B Under 9 mm
• 8482.10.5052 I-B Over 52 mm but not over 100 mm.
• 8482.10.5056 I-B Over 100 mm
• 8482.10.5060 I-B Double row ball bearings
• 8482.10.5064 I-B Other
• 8482.10.5068 I-B Other
• 8482.20.0064 I-B With cups having an outside diameter exceeding 203 mm but not exceeding 305 mm
• 8482.20.0067 I-B Other
• 8482.20.0090 I-B Other
• 8482.99.05 I-B For ball bearings
• 8482.99.15 I-B For tapered roller bearings
• 8482.99.25 I-B Other
• 8482.99.35 I-B Parts of ball bearings (including parts of ball bearings with integral shafts)
• 8482.99.45 I-B Parts of tapered roller bearings
• 8482.99.65 I-B Other
• 8483.10.1010 I-B For motorcycles
• 8483.10.1050 I-B Other
• 8483.10.50 I-B Other transmission shafts and cranks
• 8483.20.40 I-B Flange, take-up, cartridge and hanger units
• 8483.20.80 I-B Other
• 8483.30.40 I-B Flange, take-up, cartridge and hanger units
• 8483.30.80 I-B Other
• 8483.40.10 I-B Torque converters
• 8483.40.5020 I-B Gear boxes and speed changers for wind turbines, as described in statistical note 9 to thi
• 8483.40.90 I-B Gears and gearing, other than toothed wheels, chain sprockets and other transmission eleme
• 8483.50.60 I-B Flywheels
• 8483.50.90 I-B Other
• 8483.60.40 I-B Clutches and universal joints
• 8483.60.80 III Other
• 8483.90.20 III Parts of flange, take-up, cartridge and hanger units
• 8483.90.30 I-B Other
• 8483.90.50 I-B Parts of gearing, gear boxes and other speed changers
• 8483.90.5020 I-B Parts of gear boxes and speed changers for wind turbines
• 8483.90.70 I-B Parts of articles of subheading 8483.20
• 8483.90.80 I-B Other
• 8487.90.0080 I-B Other

Chapter 85

• 8501.53.60 I-B 149.2 kW or more but not exceeding 150 kW
• 8501.53.80 I-B Other
• 8501.64.0110 I-B For wind-powered generating sets classified within 8502.31.00
• 8502.20.00 I-B Generating sets with spark-ignition internal combustion piston engines
• 8502.31.00 I-B Wind-powered
• 8503.00.35 I-B For motors of under 18.65 W
• 8503.00.65 I-B Other
• 8503.00.75 I-B For motors of under 18.65 W
• 8503.00.95 I-B Other
• 8503.00.9520 I-B Parts of motors
• 8503.00.9546 I-B For AC generators (alternators) classified in statistical reporting number 8501.64.0110
• 8503.00.9570 I-B Parts of wind-powered generating sets classified in subheading 8502.31.00
• 8504.21.00 I-B Having a power handling capacity not exceeding 650 kVA
• 8504.22.00 I-B Having a power handling capacity exceeding 650 kVA but not exceeding 10,000 kVA
• 8504.23.00 III Having a power handling capacity exceeding 10,000 kVA
• 8504.31.20 I-B Unrated
• 8504.31.40 I-B Having a power handling capacity less than 1 kVA
• 8504.31.60 I-B Having a power handling capacity of 1 kVA
• 8504.32.00 I-B Having a power handling capacity exceeding 1 kVA but not exceeding 16 kVA
• 8504.33.00 I-B Having a power handling capacity exceeding 16 kVA but not exceeding 500 kVA
• 8504.34.00 III Having a power handling capacity exceeding 500 kVA
• 8504.90.20 III Printed circuit assemblies
• 8504.90.41 I-B Other
• 8504.90.65 III Of the goods of subheading 8504.40 or 8504.50 for telecommunication apparatus
• 8504.90.75 III Other
• 8504.90.9610 III For transformers
• 8504.90.9630 III Other
• 8504.90.9634 I-B Laminations for incorporation into stacked cores
• 8504.90.9638 I-B Stacked cores for incorporation into transformers
• 8504.90.9642 I-B Wound cores for incorporation into transformers
• 8504.90.9646 III Other
• 8504.90.9650 III Of static converters
• 8504.90.9690 III Other
• 8508.70.00 I-B Parts
• 8509.80.20 I-B Kitchen waste disposers (disposals)
• 8513.90.20 I-B Of flashlights
• 8514.20.40 I-B For making hot drinks, or for cooking or heating food
• 8514.20.60 I-B Other
• 8515.90.20 I-B Of welding machines and apparatus
• 8516.29.00 III Other
• 8516.60.40 I-B Cooking stoves, ranges and ovens
• 8516.60.60 I-B Other
• 8516.90.50 I-B Other
• 8516.90.8050 I-B Other
• 8517.71.00 I-B Aerials and aerial reflectors of all kinds; parts suitable for use therewith
• 8529.90.73 I-B Of radar, radio navigational aid or radio remote control apparatus
• 8536.90.8585 I-B Other
• 8538.10.00 I-B Boards, panels, consoles, desks, cabinets and other bases for the goods of heading 8537, n
• 8543.90.8885 I-B Other
• 8544.19.00 I-B Other
• 8544.42.10 I-B Fitted with modular telephone connectors
• 8544.42.20 I-B Of a kind used for telecommunications
• 8544.42.90 I-B Other
• 8544.49.10 I-B Of a kind used for telecommunications
• 8544.49.20 I-B Other
• 8544.49.90 I-B Other
• 8544.60.20 I-B Fitted with connectors
• 8544.60.60 I-B Other
• 8547.90.00 I-B Other
• 8547.90.0020 I-B Conduit tubing
• 8547.90.0030 I-B Threaded
• 8547.90.0040 I-B Other

Chapter 86

• 8601.10.00 I-B Powered from an external source of electricity
• 8601.20.00 I-B Powered by electric accumulators (batteries)
• 8602.10.00 I-B Diesel-electric locomotives
• 8602.90.00 I-B Other
• 8603.10.00 I-B Powered from an external source of electricity
• 8603.90.00 I-B Other
• 8604.00.00 I-B Railway or tramway maintenance or service vehicles, whether or not self-propelled (for exa
• 8605.00.00 I-B Railway or tramway passenger coaches, not self- propelled; luggage vans, post office coach
• 8606.10.00 I-B Tank cars and the like
• 8607.11.00 I-B Truck assemblies for self-propelled vehicles
• 8607.19.03 I-B Axles
• 8607.19.06 I-B Parts of axles
• 8607.19.12 I-B Wheels, whether or not fitted with axles
• 8607.19.15 I-B Parts of wheels
• 8607.19.90 I-B Other
• 8607.21.50 I-B Other
• 8607.30.1010 I-B Assembled freight rail couplers
• 8607.30.1050 I-B Freight rail coupler parts
• 8607.30.1090 I-B Other
• 8607.30.50 I-B Other
• 8607.91.00 I-B Of locomotives
• 8607.99.50 I-B Other
• 8609.00.00 I-B Containers (including containers for the transport of fluids) specially designed and equip

Chapter 87

• 8701.10.01 I-C Single axle tractors
• 8701.21.0080 I-B Used
• 8701.22.0080 I-B Used
• 8701.23.0080 I-B Used
• 8701.24.0080 I-B Used
• 8701.29.0080 I-B Used
• 8701.30.10 III Suitable for agricultural use
• 8701.30.50 I-C Other
• 8701.91.10 III For agricultural use
• 8701.91.50 I-C Other
• 8701.92.10 III Suitable for agricultural use
• 8701.92.50 I-C Other
• 8701.93.10 III Suitable for agricultural use
• 8701.93.50 I-C Other
• 8701.94.10 III Suitable for agricultural use
• 8701.94.50 I-C Other
• 8701.95.10 III Suitable for agricultural use
• 8701.95.50 I-C Other
• 8702.10.31 I-B Designed for the transport of 16 or more persons, including the driver
• 8702.10.61 I-B Other
• 8703.10.10 I-B Vehicles specially designed for traveling on snow
• 8703.10.50 I-B Other
• 8703.21.01 III Of a cylinder capacity not exceeding 1,000 cc
• 8705.10.00 I-C Mobile cranes
• 8705.20.00 I-C Mobile drilling derricks
• 8706.00.30 III For tractors suitable for agricultural use
• 8708.10.30 I-B Bumpers
• 8708.10.60 I-B Parts of bumpers
• 8708.29.2120 III Of steel
• 8708.29.2130 III Of aluminum
• 8708.29.5160 I-B
• 8708.40.30 III For tractors suitable for agricultural use
• 8708.40.60 III Of tractors suitable for agricultural use
• 8708.80.6590 I-B Other
• 8708.92.10 III For tractors suitable for agricultural use
• 8708.92.50 I-B For other vehicles
• 8708.92.60 III For tractors suitable for agricultural use
• 8708.92.75 I-B Other
• 8708.93.15 III Clutches
• 8708.93.30 III Other
• 8708.99.23 III Other
• 8708.99.6890 I-B Other
• 8708.99.81 I-B Other
• 8716.10.00 I-B Trailers and semi-trailers for housing or camping
• 8716.39.00 I-B Other
• 8716.80.10 III Farm wagons and carts
• 8716.80.50 I-B Other
• 8716.80.5010 I-B Industrial hand trucks
• 8716.90.10 III Parts of farm wagons and carts:
• 8716.90.30 I-B Castors, other than those of heading 8302
• 8716.90.50 I-B Other

Chapter 90

• 9013.90.80 III Other

Chapter 94

• 9403.20.0075 I-B Boltless or press-fit steel shelving units prepackaged for sale as described in statistica
• 9403.20.0082 I-B Steel racks, other than those described in statistical reporting number 9403.20.0075
• 9403.99.9020 I-B Welded wire rack, whether or not galvanized, plated or coated
• 9403.99.9040 I-B Parts for steel racks of statistical reporting number 9403.20.0082
• 9406.20.00 I-B Modular building units, of steel
• 9406.90.01 I-B Other